155 Johnson Dr. Delaware, Ohio
(740) 369-3580 FAX:
The Harris IRT Enterprises' New Portable Limit-Sensing Resistance Tester - Model 5012-06XP - is designed for production resistance testing in an industrial environment where portability and small footprint are essential. As a high resolution, digital ohmmeter, the Model 5012-06XP couples limit-sensing, laboratory precision with the durability required by industrial resistance testing applications, as well as the portability asked for by so many of our customers.
By using a four-wire, Kelvin-based, resistance measurement system, the Model 5012-06XP eliminates the inaccuracies introduced by test lead and contact resistance. When a large number of similar components are to be tested, high and low resistance limits are set using front panel push button thumbwheel switches. Indicator LEDs illuminate when a component's resistance is above, below or within set test limits. An output relay is triggered to permit the automated rejection of unacceptable or improper components.
Test voltage for 0 - 2000 ohm ranges: 200 millivolts Full Scale
Test voltage for 20000 ohm range: 2 volts Full Scale
±0.05%, ±1 digit at 25°C
3˝ digit, 0.5" [12.7mm] LED.
5 per second.
Between display readouts.
117VAC ±10%, 50-60Hz, 5 Watts (220VAC optional).
8.4" x 9.5" x 3.5" (215mm x 242mm x 89mm), Bail Foot/Handle, Plastic Case with Aluminum Front and Rear Panels
Check Options Matrix for Options available on this Resistance Tester