155 Johnson Dr.,Delaware Ohio
(740) 369-3580 FAX:
Rack Mount Limit-Sensing
The Harris IRT Enterprises' New Rack Mount Limit-Sensing Resistance Tester - Model 5012-06XR - is designed for production resistance testing in an industrial environment where "rugged" & "precision" are not mutually exclusive terms. As a high resolution, digital ohmmeter, the Model 5012-06XR couples limit-sensing, laboratory precision with the durability required by industrial resistance testing applications. The instrument will drop seamlessly into any application previously using the Harris IRT 5012-05A.
By using a four-wire, Kelvin-based, resistance measurement system, the Model 5012-06XR eliminates the inaccuracies introduced by test lead and contact resistance. When a large number of similar components are to be tested, high and low resistance limits are set using front panel push button thumbwheel switches. Indicator LEDs illuminate when a component's resistance is above, below or within set test limits. An output relay is triggered to permit the automated rejection of unacceptable or improper components.
Test voltage for 0 - 2000 ohm ranges: 200 millivolts Full Scale
Test voltage for 20000 ohm range: 2 volts Full Scale
±0.05%, ±1 digit at 25°C
3˝ digit, 0.5" [12.7mm] LED.
5 per second.
Between display readouts.
117VAC ±10%, 50-60Hz, 5 Watts (220VAC optional).
Rackmount anodized aluminum case 19" [483mm] wide by 14" [356mm] deep by 3.5" [89mm] tall.
Check Options Matrix for Options available on this Resistance Tester