155 Johnson Dr. Delaware, Ohio
The Digital Milliohmmeter - Model 5060-06XR is designed for production low resistance testing in an industrial environment. The use of a four-terminal resistance measurement system eliminates the inaccuracies introduced by test lead resistance. When a large number of similar components are to be tested, the front panel thumbwheels permit high and low resistance limits to be set. The limit sensor permits high-speed, automated testing in the milliohm and micro-ohm ranges. Indicator lamps illuminate when the resistance of a component is above, below or within test limits. An output relay is triggered to permit the automated rejection of unacceptable components. The Model 5060-06XR provides a solid-state chopper stabilized preamplifier to allow full-scale non-destructive resistance testing using only two millivolts of drop across the tested resistance. The combination of this low current operations with the four terminal resistance measuring system permits an accurate resolution of very low resistance's without risk to the test product.
Test voltage for 0 - 2000 milliohm ranges: 2 millivolts Full Scale
Test voltage for 20000 milliohm range: 20 millivolts Full Scale
±0.05%, ±1 digit at 25°C.
3˝ digit LED, 0.5" [12.7mm] LED.
5 per second.
117VAC ±10%, 50-60Hz, 5 Watts (230VAC optional).
RS-232 Included at no charge. 9600baud,N,8,1 protocol is default.
Rack-mount anodized aluminum case 19" [483mm] wide by 14" [366mm] deep by 3.5" [89mm] tall.
Check Options Matrix for Options available on this Resistance Tester