Multi-Channel Ohmmeter -
Model 6012-06XR

The Model 6012-06XR Multi-Channel Ohmmeter provides the capabilities of the Model 5012-06XR for resistances from .0001 Ohms up to 20,000 ohms. However, it is more economical than multiple units when several resistances need to be tested at the same station. It is available with four, or eight channels. Each channel may be individually set for range and high/low limits. The channel desired is selected by completing the appropriate connectors at the rear panel-mounted terminal strip. When a channel is being read, the resistance value is displayed on the LED display and the channel is indicated by a Blue LED above the Channel Limit Switches. RS232 Communications Port is included with this unit at no additional charge. Temperature Compensation can be added for a small up-charge at time of order.

SPECIFICATIONS

OPERATING RANGES:

RANGE 0 - .2 ohms 0 - 2 ohms 0 - 20 ohms 0 - 200 ohms 0 - 2000 ohms 0 - 20000 ohms

RESOLUTION 100 micro ohms 1 milliohm 10 milliohms 100 milliohms 1 ohm 10 ohms

TEST CURRENT 100 milliamps 100 milliamps 10 milliamps 1 milliamp 100 microamps 100 microamps

Test voltage for 0 - 2000 ohm ranges: 200 millivolts Full Scale

ACCURACY:

±0.05%, ±1 digit at 25°C.
±0.001% per °C, 0°C to 50°C.

DISPLAY:

3½ digit, 0.5" [12.5mm] LED.

READING RATE:

5 per second.

AUTO ZEROING:

Between display readouts.

POWER REQUIREMENTS:

117VAC ±10%, 50-60Hz, 5 Watts (230VAC optional).

ENCLOSURE:

Rack-mount anodized aluminum case 19" [483mm] wide by 14" [356mm] deep by 3.5" [89mm] tall.

Check Options Matrix for Options available on this Resistance Tester

Model 6012-06XR Specification Sheet Under Construction

New! Shop On-Line